| STEP |
WHAT YOU NEED TO KNOW |
WHAT YOU NEED TO DO |
| 1. SET THE CLOCK |
Current time in minutes,
hour, and day. |
Press Set Clock once for
minutes, again for hour, and day. Use Time Fwd
or Time Back to change each setting. |
| 2. PICK HEAT OR COOL |
Which would you like to
program first? Heat or Cool? |
Press System Switch to
Heat or Cool. |
| 3. SELECT TWO TEMPERATURES |
What temperatures
will you be using in your program? You are allowed
up to two in heating and two in cooling.
| Temps |
|
Heat |
Cool |
| A |
____ |
____ |
| B |
____ |
____ |
|
Press View Temp. Display
shows: A Temp. Use up or down arrows
to set your temperature. Continue View Temp
to enter your temperature B. Once they are entered
you will be able to select any one of the two
for any time period. |
| 4. SPREAD TEMPERATURES
TO THE PROGRAM TIMES |
What times for each day
do you want your temperatures to happen?
Factory program example:
Mon
1 5AM 64
Mon 2 8AM 70
Mon
3 5PM 64
Mon 4 10PM 64 |
Press View Pgm. Display
says: Mon 1 Time Temp Use Time Fwd or
Time Back to change Time. Use Temp Up or Temp
Down* to change Temperature. Continue View Pgm
through Mon 4.
Use Adv Day to advance through each day through
Sunday.
*Note: The temperature will only go between
the numbers you selected under View Temp above. |
| 5. RUN PROGRAM |
You are finished programming
heat or cool, whichever you selected in Step
2. |
Press Run Prgm. Program
is running. Start over to program the other
season. |
