| STEP |
WHAT YOU NEED TO KNOW |
WHAT YOU NEED TO DO |
| 1. SET THE
CLOCK |
Current time
in minutes, hour, and day. |
Press Set Clock
once for minutes, again for hour, and day. Use
Time Fwd or Time Back to change each setting. |
| 2. PICK HEAT
OR COOL |
Which would
you like to program first? |
Heat or Cool?
Press System Switch to Heat or Cool. |
| 3. SELECT FOUR
TEMPERATURES |
What
temperatures will you be using in your program?
You are allowed up to four in heating and four
in cooling.
| Temps |
| Heat Cool |
Heat Cool |
| A ___ ___ |
B ___ ___ |
| C ___ ___ |
D ___ ___ |
|
Press View
Temp. Display shows: A Temp. Use up or down
arrows to set your temperature. Continue View
Temp to enter your temperatures B, C and D.
Once they are entered you will be able to select
any one of the four for any time period. |
| 4. SPREAD TEMPERATURES
TO THE PROGRAM TIMES |
What times
for each day do you want your temperatures to
happen?
Factory program example:
Mon
1 5AM 70
Mon 2 9AM 70
Mon
3 4PM 70
Mon 4 10PM 64 |
Press View
Pgm. Display shows: Mon 1 Time Temp. Use Time
Fwd or Time Back to change time. Use Temp Up
or Temp Down* to change temperature. Continue
View Pgm through Mon 4. Use Adv Day to advance
through each day through Sunday.
*Note: The temperature will only go between
the numbers you selected under View Temp above. |
| 5. RUN PROGRAM |
You are finished
programming heat or cool, whichever you selected
in Step 2. |
Press Run Prgm.
Program is running. Start over to program the
other season. |
