| Follow these steps to enter
the heating and cooling programs you have selected.
Set Current Time
and Day
1. Press SET TIME button once.
The display will show the hour only.
EXAMPLE: 
2. Press and hold either  or  until you reach the correct hour
and AM/PM designation (AM begins at midnight;
PM begins at noon).
3. Press SET TIME once. The
display window will show the minutes only.
EXAMPLE: 
4. Press and hold either or until you reach the correct minutes.
5. Press SET TIME once. The
display will show the day of the week.
6. Press or until you reach the current day
of the week.
7. Press RUN PRGM once. The
display will show the correct time and room temperature
alternately.
Enter Heating Program
1. If you want to change the
display from Fahrenheit to Celsius (or vice-versa),
press SET TIME and HOLD TEMP at the same time.
2. Press the SYSTEM button until
HEAT is displayed.
3. Press VIEW PRGM once. "MO
TU WE TH FR" (indicating weekday program)
will be displayed. Also displayed are the currently
programmed start time for the 1st heating
period and the currently programmed temperature
(flashing).
EXAMPLE: 
This display window shows that
for the 1st weekday period, the start time is 6:00
AM, and 68° is the programmed temperature (this
example reflects factory preprogramming).
4. Press or to change the displayed temperature
to your selected temperature for the 1st heating
program period.
5. Press SET TIME once (the
programmed time will flash). Press or until your selected time is displayed.
The time will change in 15 minute increments. When
your selected time is displayed, press SET TIME
again to return to the change temperature mode.
6. Press VIEW PRGM once. The
currently programmed start time and setpoint temperature
for the 2nd heating program period will be
displayed.
7. Repeat steps 4 and 5 to select
the start time and heating temperature for the 2nd
heating program period.
8. Repeat steps 4 through 6
for the 3rd and 4th heating program periods. Weekday
heating programs are now complete.
9. Press VIEW PRGM once. "SA
SU" (indicating weekend program) will be
displayed, along with the start time for the 1st
heating period and the currently programmed temperature.
10. Repeat steps 4 through 8
to complete weekend heating programming.
11. When you have completed
entering your heating program, press RUN PRGM.
Enter Cooling Program
If the outside
temperature is below 50°F, disconnect power to the
compressor before programming. Energizing compressor
during cold weather may cause personal injury or
property damage.
1. Press SYSTEM button until
COOL is displayed.
2. Follow the procedure for
entering your heating program, using your selected
cooling times and temperatures.
CHECK YOUR
PROGRAMMING
Follow these steps to check
your thermostat programming one final time before
beginning thermostat operation.
1. Press SYSTEM button until
HEAT is displayed.
2. Press VIEW PRGM to view the
1st weekday heating period time and temperature.
Each time you press VIEW PRGM, the next heating
period time and temperature will be displayed in
sequence for weekday, then weekend program periods
(you may change any time or temperature during this
procedure).
3. Press RUN PRGM.
4. Press SYSTEM button until
COOL is displayed.
5. Repeat step 2 to check cooling
temperatures.
6. Press RUN PRGM to begin program
operation.
7. Press SYSTEM button to select
HEAT, COOL, or AUTO mode.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATICALLY PROVIDE MAXIMUM
COMFORT AND EFFICIENCY! |
